Active Direct Inject Box Professional Active DI box Features: • Input attenuation of 0, -20 and - 40 dB • 9V power supply • Invert and Groundlift switch • XLR female and 6,3 mm jack inputs • XLR female output • 6,3 mm jack-link-output

Passive Direct Inject Box Multifunctional Passive DI box Features: • Invert and groundlift switch • XLR female and 6,3 mm jack inputs • XLR male output • 6,3 mm jack-link-output

Personal monitor mix-amplifier. The SC-1 is a unique device for personal monitoring and program material at the same time. It has a monitor level control and a mic level control, mic pass-through XLR jacks, two headphone output jacks, and a 1/4" monitor input jack. Potential users may be drummers who need to hear a click track, singers who need to hear themselves, etc. The power adapter is included. Max. Input: 20 dB Mic, 40 dB Mon. Output impedance: 10 Ohm Gain: 20 dB 1/4", 50 dB XLR Bandwidth: 50 Hz - 20 kHz S/N Ratio: 90 dB Power: 9-18 VAC/DC, 9-24 VDC Dimensions: 113 x 73 x 40 mm (LxWxH) Weight: 0,249 kg

Headphone amplifier one channel The SC-11 is for expanding or generating headphone channels. It has a 1/4" stereo input, 4 volume controls, 4: 1/4" stereo output jacks and it is powered by an AC adapter (included). The SC-11 has a 20 Hz - 20 kHz response, small size, and is very easy to use. Input Impedance: 100 kilo-Ohm (unbalanced) Max. Input Level: +14 dBV Input Connectors: Stereo 1/4" TRS phone Outputs: (4) 1/4" Stereo 1/4" Max. Gain: 20 dB/Channel S/N Ratio: > 90 dB THD: < 0.008% IMD (SMPTE) < 0.008% Dimensions: 113 x 73 x 40 mm (LxWxH) Weight: 0,336 kg

Microphone splitter combiner This unit was designed to produce two balanced XLR signals from one single XLR input signal: one direct and one transformer isolated XLR signal. A ground-lift switch has been provided to eliminate some cases of hum caused by ground-loops. Input impedance: 600 Output impedance: 600 Ohm Dimensions: 95 x 73 x 40 mm (LxWxH) Weight: 0,305 kg

Two Way stereo converter The SC-13 converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, labelled 1, has two XLR inputs and stereo RCA outputs. The other side labelled 2, has stereo RCA inputs and two XLR outputs. Each side has stereo level controls, and a LED indicates that power is applied to the unit. An additional benefit of the SC-13 is that it will act as a balanced XLR line level control. By adding a pair of stereo-jumpers between the four RCA jacks (connecting ins to outs), the two level controls may be inserted into any balanced XLR line. Max. Out: Balanced: +18 dB Unbalanced: +12 dB Max. In: Balanced: +22 dB Unbalanced: +22 dB Noise Floor: -88 dB THD: 0.003% Gain: +4 In: -8 dB -10 In: +20 dB Dimensions: 143 x 93 x 45 mm (LxWxH) Weight: 0,527 kg

Mini microphone pre-amplifier The SC-14 is designed to provide a small, simple and inexpensive microphone pre amplification for a variety of applications. The unit has both XLR and 1/4" Inputs and Outputs, and a single Gain control with a clip indicator. Phantom powering is included for use with a condenser microphone. The 1/4" Output is specially designed for use as either a mono unbalanced output, or a stereo headphone output. The unit comes complete with a power adapter. Input Impedance: 10 kilo-Ohm balanced, unbalanced Max. Input Level: +4 dB V XLR balanced, +10 dB V unbalanced Max. Gain: 50 dB XLR, 44 dB 1/4" Phase Shift: <10° 20 Hz - 20 kHz EIN: 109 dB max. THD: < 0.01% IMD (SMPTE): < 0.01% Power: 12 VDC adapter Dimensions: 113 x 73 x 40 mm (LxWxH) Weight: 0,349 kg

Phono RIAA equalized pre-amplifier The SC-15 is designed to amplify an RIAA equalized phono signal to a Hi-Fi level signal, and it works well with magnetic pickups. Phono RIAA equalized pre-amplifier (incl. adapter). Display: 1 Power (LED) 1/O Connectors: RCA 1/4" TRS Stereo Power: 12-18 VDC Dimensions: 95 x 73 x 40 mm (LxWxH) Weight: 0,289 kg